hellcat Archives - Schwartz Performance https://www.schwartzperformance.com/product-tag/hellcat/ The leader in bolt-in muscle car chassis Tue, 10 Feb 2026 20:37:38 +0000 en-US hourly 1 https://wordpress.org/?v=7.1.4 https://www.schwartzperformance.com/wp-content/uploads/2019/02/cropped-favicon-32x32.png hellcat Archives - Schwartz Performance https://www.schwartzperformance.com/product-tag/hellcat/ 32 32 Hellcat Fuel Rail Fitting – Connector – Adapter 8AN 10AN https://www.schwartzperformance.com/product/hellcat-fuel-rail-fitting-connector-adapter-8an-10an/ https://www.schwartzperformance.com/product/hellcat-fuel-rail-fitting-connector-adapter-8an-10an/#respond Wed, 18 Mar 2020 20:50:47 +0000 https://www.schwartzperformance.com/?post_type=product&p=12840 The fitting that you've been looking for!
Choose 8AN or 10AN from the menu. (8AN is most common)
Scroll down for detailed info.

The post Hellcat Fuel Rail Fitting – Connector – Adapter 8AN 10AN appeared first on Schwartz Performance.

]]> This billet aluminum Hellcat/Demon/Hellephant fuel rail fitting fits on the 1/2″ male fuel rail and adapts to 8AN or 10AN male.

They feature high temp dual Viton O-rings and a steel snap ring to securely hold the fitting in place just like OEM!

Not to mention they are the LOWEST PROFILE fitting available for the Hellcat fuel rail.

The post Hellcat Fuel Rail Fitting – Connector – Adapter 8AN 10AN appeared first on Schwartz Performance.

]]> https://www.schwartzperformance.com/product/hellcat-fuel-rail-fitting-connector-adapter-8an-10an/feed/ 0 Gen 3 Hemi Engine Lifting Brackets – 5.7 6.1 6.2 6.4 https://www.schwartzperformance.com/product/gen-3-hemi-engine-lifting-brackets-5-7-6-1-6-2-6-4/ https://www.schwartzperformance.com/product/gen-3-hemi-engine-lifting-brackets-5-7-6-1-6-2-6-4/#respond Mon, 11 Nov 2019 23:05:08 +0000 https://www.schwartzperformance.com/?post_type=product&p=12663 Trying to figure out how to lift that Hellcat engine without bending bolts or washers, or scratching the brand new powdercoat off the valve covers & supercharger?
Our Gen 3 Hemi lift brackets fit all 5.7, 6.1, 6.2, 6.4 and of course the 7.0 Hellephant, and come with mounting hardware. Sold as a set of 4 brackets for a 4-corner attachment.

The post Gen 3 Hemi Engine Lifting Brackets – 5.7 6.1 6.2 6.4 appeared first on Schwartz Performance.

]]> We ran into a problem. That problem was, “how do we lift this Hellcat engine and not scratch the supercharger or valve covers?
We came up with this solution!
Sold as a set of 4, these brackets are flame cut & TIG welded to match all Gen 3 Hemi exhaust port mounting holes. Bolts are included, to mount them to your heads! Use some anti-seize though to prevent galling.
You will need to disconnect the exhaust manifolds, and that’s it! The brackets are designed to fit around OEM valve covers. They have a hole at the top for you to bolt a chain to, or some other fastening device to your hoist.

These are uncoated steel, and will rust over time. If that’s a problem for you, wipe some WD40 on them, paint them, etc.
We would powdercoat them, but after the first use they would not look so good anymore.

Flat cost shipping within the USA is $20. If you’re outside the 48 states, please give us a call or email for a quote.

The post Gen 3 Hemi Engine Lifting Brackets – 5.7 6.1 6.2 6.4 appeared first on Schwartz Performance.

]]> https://www.schwartzperformance.com/product/gen-3-hemi-engine-lifting-brackets-5-7-6-1-6-2-6-4/feed/ 0 Hellcat Supercharger Intercooler Manifold Adapters – Billet Aluminum AN https://www.schwartzperformance.com/product/hellcat-supercharger-intercooler-manifold-adapters-billet-aluminum-an/ Wed, 28 Nov 2018 23:03:34 +0000 https://www.schwartzperformance.com/product/import-placeholder-for-10970/ Our billet aluminum Hellcat supercharger intercooler manifold adapters will gain you firewall clearance on your swap project!

These were designed by Schwartz Performance, and CNC machined out of T6061 aluminum in the USA.

Choose from machined finish or black anodized, with or without connecting hoses.

Scroll down for additional details.

The post Hellcat Supercharger Intercooler Manifold Adapters – Billet Aluminum AN appeared first on Schwartz Performance.

]]> Make your Hellcat swap a little easier by ditching the large cast intercooler manifold on the factory Hellcat / Demon superchargers, and replace with our exclusive billet adapters!
The passenger side manifold is about 1 inch shallower than the factory Hellcat piece, NOT INCLUDING the pesky temp sensor that sticks off even further!

With our manifolds, you can choose your own path for the intercooler hoses, and use #10 AN hose instead of ugly rubber hose or attempting to adapt factory hoses.

Our kit includes:
-(1) LH and (1) RH billet aluminum manifold
-(4) #10 AN to O-ring adapters
-(1) #10 AN to NPT fitting adapter for temp sensor
-(1) 1/8″ NPT allen plug
-(1) #10 O-ring low profile allen plug
-(2) Assembled #10 AN hoses for connecting the two manifolds together

***You will need to furnish the in/out side of the blocks to your reservoir/pump/heat exchanger using #10 AN O-ring adapters of your choice. Straight or 45 degree swivel adapters will work, with a 90 or 45 degree hose end attached.***

ITEMS TO REUSE OR SOURCE FROM A PARTS STORE/DEALER:
-(1) Mopar water temp sensor
-(1) 1/8NPT bleeder
-(4) Torx button head bolts

 


 

The post Hellcat Supercharger Intercooler Manifold Adapters – Billet Aluminum AN appeared first on Schwartz Performance.

]]>