Author: Schwartz Performance

  • 1964–1973 Mustang Chassis

    1964–1973 Mustang Chassis

    64-73_Mustang_Header

    Your Mustang’s uni-body construction is inherently weak. Our G-Machine Chassis isn’t.

    The sheet-metal that your suspension components and engine are mounted to begins to flex dramatically once you add more horsepower, higher spring-rates, better brakes, and better tires! With our G-Machine Chassis, your engine, rear-end, steering and suspension are isolated from the body. The G-Machine Chassis becomes the main support for your car and the uni-body structure simply becomes added support, helping to tie together the G-Machine Chassis.
    The G-Machine Chassis is available for 1964 1/2, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 & 1973 Mustangs.

    Installation is simple.

    • You are not required to cut your floor-pan
    • The only required cutting is of minor brackets, front frame-rails and front shock towers—creating a “clean” engine bay
    • Some cutting may be required above the rear axle on the factory shock mount area
    • The only required welding is of four mounting plates onto the toe-board and under the floorpan
    • The only required drilling is of two bolt-holes in the factory rear frame rails

    Want wider tires?

    • All G-Machine Chassis allow fitment of up to 345mm-wide rear tires if you minitub the wheel wells
    • The Moser full-floating 9″ is narrowed to 56″ hub-to-hub to allow a deeper dish on the rear wheels
    • ***Minitubbing is NOT REQUIRED with a narrowed axle. This only provides a deeper lip on the wheel***

    Which options do I choose?

    Brakes:

    If you are running smaller wheels, contact us, we can help.
    -Step up to the 14-inch Baer 6P Pro-Plus and get a brake system that will suit whatever you want to do. We race our 1965 Tempest often with this brake setup.
    -The baddest kit is the Baer 6S, which is a one-piece forged caliper. This brake kit suits the hardcore roadracer, but does not sacrifice street driving.
    -The 14″ brakes require a 18″ diameter wheel, however. Additionally, the Baer calipers are available in many colors.

    Baer brake rotors and calipers

    Coilover shocks:

    -We use RideTech coilovers as standard on our chassis systems. The two options we offer are single-adjustable and triple-adjustable.
    -Single adjustable coilovers offer 24 “clicks” of adjustment for damping, as well as ride height adjustment. These will suit the weekend autocrosser/roadracer, as well as daily drivers.
    -Triple adjustable coilovers offer the same damping adjustment as the singles with the addition of high and low speed compression adjustments, and a remote reservoir. These allow you to fine-tune your suspension for a specific type of driving. These are recommended for those who are willing & able to spend time tuning the shocks, and/or for the roadracer where every thousandth of a second counts.
    -Air ride is also available, please call for pricing & info.

    coilover options1

    Rear end housing:

    -Our standard axle is a Moser full-floating 9″ style housing, with 31-spline axles. We have tested this rear end up to 1000hp street cars with no issues. Contact us for higher HP, or if you’ll be drag racing it often on slicks with over 800hp.
    Don’t know what a full-floater is? CLICK HERE: Full Floating Rear End Advantages
    -The Heidts IRS option is for those craving an IRS in their musclecar. This is recommended for up to 700hp.

    housing options2

    Third member/differential:

    -The Ford 9″ comes with a clutch-type posi. Our first option is just that, with a cast-iron center section. If you have less than 500hp and won’t be racing the car often, this is just fine for you.
    -The Detroit TrueTrac differential is a helical-gear type posi, which holds up to more power than the clutch posi, lasts longer (no wearable parts), and is quiet enough for street cars.
    -Moser offers a new nodular iron case which is recommended for 600+ hp and racing. Their aluminum case also holds up to higher horsepower, and is much lighter than iron cases.

    Pictures:

    (Click to enlarge)

    Installation photos:

    Base price includes:

    • A fully welded chassis, built on a precision jig
    • Adjustable transmission crossmember
    • All front and rear suspension components (excluding coilovers): control arms, ball joints, tie rods, power rack & pinion, aluminum front wheel hubs with bearings, and teflon-lined heim joints for a quieter & bind-free suspension
    • BASE PRICE DOES NOT INCLUDE ANY BRAKES, SHOCKS, OR REAR END. CHOOSE THOSE ITEMS BELOW

    Payment terms: 75% down at time of order, remaining 25% due before shipment.

    Shipping: For an assembled frame, we use an enclosed car transporter. If you don’t want the frame assembled, we’ll ship it truck freight in a crate. There is a crating fee which will be determined upon ordering.

    Pricing below is only for reference. Please call to order.

    Pricing:

    View the current chassis profile

  • 1970–1974  E-Body, Challenger, Cuda Chassis

    1970–1974 E-Body, Challenger, Cuda Chassis

    Your Mopar’s uni-body construction is inherently weak. Our G-Machine Chassis isn’t.

    Thinking about running a 1000hp Hellephant engine? Your stock unibody isn’t going to hold up to that 1000hp monster. Our chassis will, though!

    Introducing the FIRST and ONLY bolt-in full length frame / chassis for your Mopar unibody!

    The sheet-metal that your suspension components and engine are mounted to begins to flex dramatically once you add more horsepower, higher spring-rates and better brakes. With our G-Machine Chassis, your engine, rear-end, steering and suspension are isolated from the body. The G-Machine Chassis becomes the main support for your car and the uni-body structure simply becomes added support, helping to tie together the G-Machine Chassis.

    The G-Machine Chassis is available for 1970, 1971, 1972, 1973 & 1974 Mopar E-Bodies:

    • ‘Cuda
    • Challenger

    Installation is simple.

    • Our chassis requires a notch to be made in the REAR seat foot well area for our chassis rail to pass through. The chassis will impede into the interior only about an inch. If you do not want to cut the floor at all, we can notch our rail at no charge, but this will need to be specified. The reason we require this is due to strength.
    • The additional required cutting is of minor brackets, front frame-rails and front shock towers—creating a “clean” engine bay
    • The only required welding is of eight mounting plates onto the original torsion bar cross-member, as well as the toe board
    • Depending on the transmission choice, your tunnel may need to be modified

    Want wider tires?

    • All G-Machine Chassis allow fitment of up to 345mm-wide rear tires if you minitub the wheel wells

    Which options do I choose?

    Brakes:

    -Step up to the 14-inch Baer 6P Pro-Plus and get a brake system that will suit whatever you want to do. We race our 1965 Tempest often with this brake setup.
    -The baddest kit is the Baer 6S, which is a one-piece forged caliper. This brake kit suits the hardcore roadracer, but does not sacrifice street driving.
    -The 14″ brakes require a 18″ diameter wheel, however. Additionally, the Baer calipers are available in many colors.

    Baer brake rotors and calipers

    Coilover shocks:

    -We use RideTech coilovers as standard on our chassis systems. The two options we offer are single-adjustable and triple-adjustable.
    -Single adjustable coilovers offer 24 “clicks” of adjustment for damping, as well as ride height adjustment. These will suit the weekend autocrosser/roadracer, as well as daily drivers.
    -Triple adjustable coilovers offer the same damping adjustment as the singles with the addition of high and low speed compression adjustments, and a remote reservoir. These allow you to fine-tune your suspension for a specific type of driving. These are recommended for those who are willing & able to spend time tuning the shocks, and/or for the roadracer where every thousandth of a second counts.
    -Air ride is also available, please call for pricing & info.

    coilover options1

    Rear end housing:

    -Our standard axle is a Moser full-floating 9″ style housing, with 31-spline axles. We recommend this option up to 900hp street cars. Contact us if you are putting more power to the ground, and/or will be drag racing on slicks.
    -The Heidts IRS option is for those craving an IRS in their musclecar. This is recommended for up to 700hp.
    -We can also provide Mopar housings for those interested. Please call for information & pricing.

    housing options2

    Third member/differential:

    -The Ford 9″ comes with a clutch-type posi. Our first option is just that, with a cast-iron center section. If you have less than 500hp and won’t be racing the car often, this is just fine for you.
    -The Detroit TrueTrac differential is a helical-gear type posi, which holds up to more power than the clutch posi, lasts longer (no wearable parts), and is quiet enough for street cars.
    -Moser offers a new nodular iron case which is recommended for 600+ hp and racing. Their aluminum case also holds up to higher horsepower, and is much lighter than iron cases.

    Pictures:

    (Click to enlarge)

    Base price includes:

    • A fully welded chassis, built on a precision jig
    • Adjustable transmission crossmember
    • All front and rear suspension components (excluding coilovers): control arms, ball joints, tie rods, power rack & pinion, aluminum front wheel hubs with bearings, and teflon-lined heim joints for a quieter & bind-free suspension
    • BASE PRICE DOES NOT INCLUDE ANY BRAKES, SHOCKS, OR REAR END. CHOOSE THOSE ITEMS BELOW

    Payment terms: 75% down at time of order, remaining 25% due before shipment.

    Shipping: For an assembled frame, we use an enclosed car transporter. If you don’t want the frame assembled, we’ll ship it truck freight in a crate. There is a crating fee which will be determined upon ordering.

    Pricing below is only for reference. Please call to order.

    Pricing:

    View the current chassis profile

  • 1967-1969  F-Body, Firebird, Camaro Chassis

    1967-1969 F-Body, Firebird, Camaro Chassis

    Your F-Body’s uni-body construction is inherently weak. Our G-Machine Chassis isn’t.

    The sheet-metal that your suspension components and engine are mounted to begins to flex dramatically once you add more horsepower, higher spring-rates and better brakes. With our G-Machine Chassis, your engine, rear-end, steering and suspension are isolated from the body. The G-Machine Chassis becomes the main support for your car and the uni-body structure simply becomes added support, helping to tie together the G-Machine Chassis.

    The G-Machine Chassis is available for 1967, 1968 & 1969 GM F-Bodies:

    • Chevrolet Camaro
    • Pontiac Firebird/Trans Am

    Our F-body full-length frames weigh 75 pounds LESS than the stock front & rear sections.

    Want wider tires?

    • All G-Machine Chassis allow fitment of up to 345mm-wide rear tires if you minitub the wheel wells
    • The Moser full-floating 9″ is narrowed to 56″ hub-to-hub to allow a deeper dish on the rear wheels

    Installation is simple:

    • The rear foot wells need to be slotted (approx 2.5″x15″)
    • The front inner fender wells may need to be modified, depending on desired stance and body bushing thickness.
    • This chassis is still a bolt-in unit, but requires a little bit of floor cutting and welding.
    • Our side-exhaust cutouts are no longer standard, but still optional.

    Which options do I choose?

    Brakes:

    -Step up to the 14-inch Baer 6P Pro-Plus and get a brake system that will suit whatever you want to do. We race our 1965 Tempest often with this brake setup.
    -The baddest kit is the Baer 6S, which is a one-piece forged caliper. This brake kit suits the hardcore roadracer, but does not sacrifice street driving.
    -The 14″ brakes require a 18″ diameter wheel, however. Additionally, the Baer calipers are available in many colors.

    Baer brake rotors and calipers

    Coilover shocks:

    -We use RideTech coilovers as standard on our chassis systems. The two options we offer are single-adjustable and triple-adjustable.
    -Single adjustable coilovers offer 24 “clicks” of adjustment for damping, as well as ride height adjustment. These will suit the weekend autocrosser/roadracer, as well as daily drivers.
    -Triple adjustable coilovers offer the same damping adjustment as the singles with the addition of high and low speed compression adjustments, and a remote reservoir. These allow you to fine-tune your suspension for a specific type of driving. These are recommended for those who are willing & able to spend time tuning the shocks, and/or for the roadracer where every thousandth of a second counts.
    -Air ride is also available, please call for pricing & info.

    coilover options1

    Rear end housing:

    -Our standard axle is a Moser full-floating 9″ style housing, with 31-spline axles. We have tested this rear end up to 1000hp street cars with no issues. Contact us for higher HP, or if you’ll be drag racing it often on slicks with over 800hp.
    -The Heidts IRS option is for those craving an IRS in their musclecar. This is recommended for up to 700hp.

    housing options2

    Third member/differential:

    -The Ford 9″ comes with a clutch-type posi. Our first option is just that, with a cast-iron center section. If you have less than 500hp and won’t be racing the car often, this is just fine for you.
    -The Detroit TrueTrac differential is a helical-gear type posi, which holds up to more power than the clutch posi, lasts longer (no wearable parts), and is quiet enough for street cars.
    -Moser offers a new nodular iron case which is recommended for 600+ hp and racing. Their aluminum case also holds up to higher horsepower, and is much lighter than iron cases.

    Check out the installation video below:

    Watch video on YouTube

    Base price includes:

    • A fully welded chassis, built on a precision jig
    • Adjustable transmission crossmember
    • Race-bred front and rear suspension components (excluding coilovers): control arms, ball joints, tie rods, power rack & pinion, aluminum front wheel hubs with bearings, and teflon-lined heim joints for a quieter & bind-free suspension

    Shipping:

    We ship assembled chassis using enclosed car transporters. If you order the chassis un-assembled, we’ll ship it via truck-freight in a crate. There is a crating fee, which will be determined upon ordering.

    Pricing is for reference only. For questions, call 815.206.2230

    Pricing:

    View the current chassis profile