Author: Schwartz Performance

  • Schwartz Performance Shop Update February 2023

    Check out our February 2023 shop update and some more important announcements!

    https://www.youtube.com/watch?v=9eRqHnyrvjQ
  • Schwartz Performance Shop Update January 2023

    Check out our January 2023 shop update and some more important announcements!

    https://www.youtube.com/watch?v=tzkCBBdyfK0
  • Schwartz Performance Shop Update December 2022

    Check out our December 2022 shop update and some more important announcements!

    https://www.youtube.com/watch?v=QnNwHRUrijw
  • 1968 Chevy Chevelle

    1968 Chevy Chevelle

    This 1968 Chevy Chevelle received a new lease on life with an updated G-machine chassis.

    Frame and Suspension

    • Schwartz Performance bolt-in G-Machine Chassis
    • Ridetech shockwaves air ride system with 5-Gal tank and ride pro HP upgrade/sensors
    • Power steering rack
    • Baer 14″ 6-piston front and rear brakes

    Engine

    • Chevrolet Performance 6.2L LS3

    Drivetrain

    • Chevrolet Performance 6L80 Transmission
    • John’s 9″ medium duty iron third member, 31 spline axles, TrueTrac differential, 3.89 gear
  • 1972 Chevy C-10 Pickup

    1972 Chevy C-10 Pickup

    We sold our ’49 shop truck a few years back, so we’re building another pickup. It’s being built as more of a cruiser than a racer, but you know we’re going to take it to autocross events and track days to show that our C10 chassis can handle like a sports car.

    Frame & Suspension

    • Schwartz Performance G-Machine chassis system
    • Power steering rack
    • Ridetech single-adjustable coilovers
    • Racing style splined sway bars
    • Baer 14″ brakes, 6 piston front and rear

    Engine

    • 540 Big Block Chevy, 600hp
    • Aluminum heads
    • Enderle 8-stack intake manifold, with custom retro-fitted EFI
    • Vintage Air Front Runner billet serpentine drive system
    • Holley Dominator EFI system
    • Custom stainless steel headers
    • Custom 3” stainless steel exhaust

    Drivetrain

    • GM 4L80E transmission, performance rebuilt
    • Custom steel driveshaft
    • Moser 9”, 31 spline axles
    • Baer Tracker full-floater hubs
    • 9” third member with TrueTrac differential

    Wheels and Tires

    • Forgeline 18×11 and 18×12 wheels, TBD
    • BFG Rival S tires, 315/30/18 front, 335/30/18 rear

    Paint & Body

    • Shaved drip rail
    • Minitubbed bed sides
    • Custom firewall
    • Bedliner applied to bottom of cab and bed

    Interior

    • Dakota Digital HDX gauge system
    • Custom seats & upholstery
    • Optima battery
    • Vintage Air A/C & controls
    • Flaming River steering column

    Other Features

    • Custom BeCool aluminum radiator w/electric fan
    • American Autowire universal harness
    • LED tail lights
    • Baer Brakes ReMaster billet master cylinder

    The Rendering

    C-10 In the beginning

    Disassembly gallery

    Chassis build gallery

    Sheet metal fab gallery

    Misc fab & assembly before paint gallery

  • 1967 Camaro 427

    1967 Camaro 427

    This customer had already purchased sub-frame connectors from somewhere else but came to us to install it. He decided to have us add brakes, rear end housing, wheels, and a paint job and after being very happy with the work we did. He has a small block 427 set up to run E85 that we’ll be installing, and this is going to be one sweet ’67 Camaro when it’s done. Stay tuned!

    Sub-frame and Suspension

    • Power steering rack
    • Ridetech single-adjustable coilovers

    Engine

    • Pro-built 427 small block

    Drivetrain

    • Tremec T56 Magnum
    • American Powertrain clutch & flywheel

    Sub-frame installation

    Drivetrain and mockup

    Exhaust fabrication

    Bodywork and paint

    Final Assembly

  • 1975 Pontiac Trans Am 455

    1975 Pontiac Trans Am 455

    In 1974 the gas crunch was in full swing and peak of the muscle car era ended. Then Pontiac announced there would be a 1975 Trans Am with a 455 HO package. It included the 455 HO shaker hood, a 4-speed floor mounted manual trans with a 3.23 performance axle ratio, semi-metallic front disc brakes, and a specifically tuned exhaust system with twin exhaust splitters. Here’s another full build Trans AM we’re doing and in the process becoming Trans Am experts. Luke’s 1975 came to us as a nice, complete painted, running and driving car. Upon disassembly we found a bit of covered up rust and low quality repairs. Like most cars its age it had already seen some level of restoration but Luke is having us take it to the next level with a ground up, bare metal/new metal, Pro Touring custom build. Starting with a Schwartz G-Machine performance chassis and GM LT4 Supercharged motor with a Whipple supercharger in place of the stock unit – this bird is gonna fly!

    Frame and Suspension

    • Schwartz Performance bolt-in G-Machine Chassis
    • Ridetech single-adjustable coilovers
    • Power steering rack
    • Baer 14″ 6-piston Pro Plus brake system w/rear floater kit
    • HD splined sway bars front & rear

    Engine

    • Chevrolet Performance Wet Sump LT4 crate engine
    • Upgraded camshaft, valvetrain & pulleys, Innovators West crank pulley
    • Whipple 2.9L supercharger
    • Chevrolet Performance LT4 controller kit w/harness & ECU
    • Drive Junky LT4 serpentine drive system
    • Methanol injection system
    • Estimated horsepower: 900hp at the crank

    Drivetrain

    • Chevrolet Performance 8L90e 8-speed automatic transmission
    • Chevrolet Performance Supermatic trans controller
    • Custom steel driveshaft
    • Moser full-floating 9″ housing & 35 spline axles
    • Currie 9” iron third member, 35 spline axles, TrueTrac differential, 3.25 gear

    Wheels & Tires

    • Forgeline TA3 wheels, 19×9 front, 19×12 rear
    • Michelin Pilot Super Sport tires, 265/35/19 front, 345/30/19 rear

    Paint & Body

    • Custom fabricated steel fender flares front & rear
    • Filled marker lights front & rear
    • Fiberglass bumpers
    • Custom hood bird by StickerDude
    • Paint color – pearl white

    Interior

    • Recaro Sport seats
    • SpeedHut custom gauges
    • Twist Machine paddle shifters
    • Billet Specialties steering wheel
    • Flaming River tilt steering column
    • Vintage Air Gen IV A/C system
    • Customized DSE 4-point roll bar
    • Lokar sport shifter
    • Upholstery TBD 

    Other Features

    • BeCool 1000hp-rated aluminum radiator module w/electric fans
    • Stainless EFI fuel tank with CTS-V pump & Vaporworx pickups
    • American Autowire Highway 22 wiring harness
    • Optima YellowTop battery

    Arrival

    Disassembly gallery

    After chemical stripping.

    Chassis fabrication and installation

    Sheet metal fabrication

    Pre-assembly & mockup 

    Interior related

    Bodywork & paint

    Final Assembly

  • 1963 Chevy II Nova SS Convertible

    1963 Chevy II Nova SS Convertible

    A new Super Sport package was available on the Nova 400 coupe and convertible. The SS package included finned wheel covers, wider body-side moldings, aluminized rear panels and SS emblems and originally cost $161 and the I6 packed 120hp. Only 44,000 Nova SS coupes and convertibles were produced during the 1963 model year. This one will get our G-Machine chassis with giant Baer Brakes, RideTech coilovers, 8-speed auto trans, and the new Gen V LT4 engine that’ll quickly bring this up to speed with 650hp.

    Frame and Suspension

    • Schwartz Performance bolt-in G-Machine Chassis
    • Ridetech single-adjustable coilovers
    • Power steering rack
    • Baer 14″ 6-piston Pro Plus brake kits front and rear
    • Splined sway bars front & rear

    Engine

    • Chevrolet Performance 650hp Gen V LT4 crate engine
    • Chevrolet Performance LT4 controller kit w/harness & ECU
    • Drive Junky LT4 serpentine drive system
    • Custom throttle body relocation
    • Custom 4″ cold air intake
    • Custom high-capacity aluminum intercooler reservoir

    Drivetrain

    • Chevrolet Performance 8L90E 8-speed automatic transmission
    • Custom steel driveshaft
    • Moser 9″ housing and 31 spline axles with Baer Brakes full floater hub system
    • Currie 9″ aluminum third member, 31 spline axles, TrueTrac differential, 3.25 gear

    Wheels & Tires

    • Forgeline Rebel wheels, 18×8.5 front & 18×10.5 rear
    • Michelin Pilot Sport 4S 245/40/18 front & 285/35/18 rear.

    Sheet Metal & Body Exterior

    • Entire car was dipped & E-coated for rust protection
    • Custom inner fender panels
    • Detroit Speed minitubs
    • Final color: WHITE!
    • Black cloth top

    Interior

    • Custom 6-point bolt-in roll cage
    • Flaming River tilt steering column
    • Vintage Air Gen IV a/c system
    • Recaro Expert M seats
    • American Autowire wiring harness
    • Boese billet gauge carrier with Classic Instruments gauges
    • Customized dash with added A/C & heater vents
    • SeatBeltPlanet 3-point retractable seat belts

    Other Features

    • AutoRad aluminum radiator support, radiator, heat exchanger, and AC condenser kit
    • American Autowire wiring harness
    • Stainless EFI fuel tank with ZL1 pump & Vaporworx pickups
    • Dual Optima YellowTop batteries

    Arrival

    Disassembly

    Dipping & E-coat

    Sheet metal repair and fabrication

    Chassis fabrication & fitment

    Pre-assembly & mockup

    Interior related

    Bodywork & paint

    Final Assembly

  • 1967 Mercury Cougar

    1967 Mercury Cougar

    This 1967 Mercury Cougar was restored many years ago and the owner decided it was time for a fresh revamp! The completed car will be a high performance cruiser. Take a look at the specs below & pictures following!

    Frame and Suspension

    • Schwartz Performance bolt-in G-Machine Chassis
    • Power steering rack
    • Baer Pro-Plus 14″ 6-Piston brake kit
    • Splined front and rear sway bars 
    • RideTech single-adjustable coil-over shocks & springs

    Engine

    • Ford Racing all aluminum 5.0L Coyote crate engine 
    • ProCharger P-1 supercharger with custom mounting plate  
    • Stainless steel long tube headers
    • Custom 3″ stainless steel dual exhaust system with SpinTech mufflers 

    Drivetrain

    • Tremec T56 Magnum
    • Moser 9″ housing and 31 spline axles
    • TrueTrac differential with 4.10 Ratio
    • Baer Tracker full floater system

    Wheels & Tires

    • Wheels TBD: 18×8 front 18×12 rear
    • Tires TBD 

    Exterior

    • Body will be Caribbean aqua metallic 
    • Smooth firewall & inner fenders, painted satin black
    • Custom fabricated engine covers 
    • Charcoal convertible top 
    • LED headlights/tail light 
    • DSE minitubbed by Schwartz Performance 

    Interior

    • Teal blue, charcoal and brushed accents
    • Double din stereo with XM radio, bluetooth, USB and GPS 
    • Flaming River tilt steering column  
    • 10″ subwoofer 
    • Vintage Air air conditioning system

    Other Features

    • American Autowire body harness 
    • Optima YellowTop battery 
    • BeCool Radiator 
    • Upgraded electric headlight motors

    Arrival & disassembly

    Chassis fabrication & install

    After Media Blast 

    Sheet metal fabrication 

    Pre-Assembly

    Bodywork & Paint

    Final Assembly

    Interior

  • 1954 Studebaker Commander

    1954 Studebaker Commander

    This 1954 Studebaker Commander came in for the full Schwartz treatment. Of course it’ll be outfitted with our G-Machine Chassis and Coyote power! We are doing a custom wide-body on this build. Check out the info & pics below to see this wild ride come to life. 

    Frame & Suspension

    • Schwartz Performance bolt-in G-Machine Chassis
    • Ridetech single-adjustable coilovers
    • Flaming River steering column
    • Wilwood 13″ 6 piston front brakes, 12″ 4 piston rear
    • Splined sway bars front & rear

    Engine

    • Chevrolet Performance LT4 

    Fuel system

    • Custom fuel tank w/ VZL pumps

    Paint & Body

    • Custom wide body by Schwartz Performance 

    Interior

    • Scat Procar Rally DLX recliner seats

    Chassis fabrication & install

    Sheet metal fabrication 

    Pre-Assembly

    Bodywork & Paint