Author: Schwartz Performance

  • Dave’s 1967 Chevy II Nova

    Dave’s 1967 Chevy II Nova

    Dave’s ’67 Nova is going to be a badass pro-touring machine. Utilizing a Schwartz G-Machine chassis, Schwartz Performance 650hp LS7 engine, T56 Magnum transmission, Baer 6-piston monoblock brakes, RideTech coilovers, and custom fabrication/bodywork by Joe Miller & some by Schwartz Performance, this ’67 will tear up the autocross/roadrace track and drop jaws doing so! The pictures below belong to Nostalgic Autobody

  • Transmission Parts & Accessories

    Schwartz Performance offers many different products from numerous transmission & accessory companies.

    If you have any questions regarding products listed, please give us a call or shoot us an email- click the Contact Us button at the top of this webpage!

    Click the links below to be directed to the appropriate page

    Manual transmission parts

    Automatic transmission parts    

  • Tires

    Schwartz Performance offers tires to go along with wheel purchases.   We’re a dealer for:  

    BFGoodrich
    Rival, KDW 2, etc.

    Falken

    Michelin
    Pilot Sport 2, PS2, Pilot Super Sport, etc.

    Nitto
    Invo, NT05, NT555, NT05R, NT555R, NT01, etc.

    Pirelli

    AND MANY MORE!

    Visit www.TireRack.com for availability and pricing. We offer discounts for customers purchasing wheels through us as well!

    DSCN1906
    GLD01_69Camaro_Exterior
    DSCN4289
  • Replacement Rotors & Hardware

    Replacement Rotors & Hardware

    NOW AVAILABLE!
    REPLACEMENT BRAKE ROTORS FOR ULTIMA CARS! THESE ROTORS ARE CUSTOM MACHINED FOR SCHWARTZ PERFORMANCE AND DESIGNED TO BE A DIRECT REPLACEMENT FOR ULTIMA GTR / CAN-AM ETC.

    These will work with stock Ultima AP brakes. This kit does NOT include hats- reuse your current aluminum hats.

    Includes:

    • 2 front rotors (directional slotted & vented)
    • 2 rear rotors (directional slotted & vented)
    • 50 stainless steel washers
    • 50 ultra-corrosion resistant high strength hex bolts
    • 50 military-spec high temp flanged nuts with distorted locking thread

    Pricing:

    • 4 VENTED rotors- $1020
    • 50 nuts, bolts, and washers- $95
    • Cross-drill option- $25 each, additional

    Lead time: 1-2 weeks

  • 1959-1964 Fullsize Chevy, Impala, Biscayne Chassis

    1959-1964 Fullsize Chevy, Impala, Biscayne Chassis

    Impala narrow

    NOW AVAILABLE! THE ULTIMATE UPGRADE FOR FULL-SIZE CHEVROLET / CHEVY X-FRAME CARS

    Your original X-frame chassis is inherently weak. Our G-Machine Chassis isn’t.

    The old, flexible X-frame that your suspension components and engine are mounted to begins to flex dramatically once you add more horsepower, higher spring-rates and better brakes; not to mention it’s nearly 50 years old. With our G-Machine Chassis, your car’s body will encounter much less flex and added ride quality, resulting in an all-around performing vehicle. Sure, you can box the original chassis and add new components; but would you build a HOUSE without a solid foundation?
    Want to out-handle late-model sports cars? You’ve chosen the right chassis.

    The G-Machine Chassis is available for 1959, 1960, 1961, 1962, 1963, & 1964 Chevrolet fullsize “x-frame” cars:

    • Chevy Bel Air
    • Chevy Impala
    • Chevy Biscayne

    NOTE: Our chassis are designed to BOLT in to 1959-1964 cars ONLY. 1958 X-frame cars sat on a different wheelbase than 1959-1964. If you have a 1958 car, we’ll need the car here to make the chassis.

    Installation is simple.

    • Our bolt-in design integrates ALL original X-frame mounting points
    • The floorpan does NOT need to be completely cut out. Instead, we require you to slot the floors next to the rocker panel, and weld in channels with 3 holes on each side for extra body mounts to further strengthen the overall package.
    • Our design offers more exhaust clearance than the stock X-frame, AND the ability to run a 1 piece driveshaft.
    • We’ve designed this chassis to accept big block & small block Chevy engines, as well as GM LS engines. We can cater to virtually any engine/trans combo!

    Want wider tires?

    • All G-Machine Chassis allow for up to 345mm-wide rear tires if you minitub the wheel wells and relocate one (stock) body mount.
    • The Moser full-floating 9″ rear end is narrowed to 60″ to allow fitment for deeper dish wheels (different rear end widths available, too!)

    Which options do I choose?

    Brakes:

    -Step up to the 14-inch Baer 6P Pro-Plus and get a brake system that will suit whatever you want to do. We race our 1965 Tempest often with this brake setup.
    -The baddest kit is the Baer 6S, which is a one-piece forged caliper. This brake kit suits the hardcore roadracer, but does not sacrifice street driving.
    -The 14″ brakes require a 18″ diameter wheel, however. Additionally, the Baer calipers are available in many colors.

    Baer brake rotors and calipers

    Coilover shocks:

    -We use RideTech coilovers as standard on our chassis systems. The two options we offer are single-adjustable and triple-adjustable.
    -Single adjustable coilovers offer 24 “clicks” of adjustment for damping, as well as ride height adjustment. These will suit the weekend autocrosser/roadracer, as well as daily drivers.
    -Triple adjustable coilovers offer the same damping adjustment as the singles with the addition of high and low speed compression adjustments, and a remote reservoir. These allow you to fine-tune your suspension for a specific type of driving. These are recommended for those who are willing & able to spend time tuning the shocks, and/or for the roadracer where every thousandth of a second counts.
    -Air ride is also available, please call for pricing & info.

    coilover options1

    Rear end housing:

    -Our standard axle is a Moser full-floating 9″ style housing, with 31-spline axles. We have tested this rear end up to 1000hp street cars with no issues. Contact us for higher HP, or if you’ll be drag racing it often on slicks with over 800hp. Not familiar with a full-floater?

    CLICK HERE FOR INFORMATION.
    -The Heidts IRS option is for those craving an IRS in their musclecar. This is recommended for up to 700hp.

    housing options2

    Third member/differential:

    -The Ford 9″ comes with a clutch-type posi. Our first option is just that, with a cast-iron center section. If you have less than 500hp and won’t be racing the car often, this is just fine for you.
    -The Detroit TrueTrac differential is a helical-gear type posi, which holds up to more power than the clutch posi, lasts longer (no wearable parts), and is quiet enough for street cars.
    -Moser offers a new nodular iron case which is recommended for 600+ hp and racing. Their aluminum case also holds up to higher horsepower, and is much lighter than iron cases.

    Pictures:

    (Click to enlarge)

    BASE PRICE INCLUDES:

    • A fully-welded chassis, built on a precision jig
    • Adjustable transmission crossmember
    • Race-bred front and rear suspension components (excluding coilovers): control arms, ball joints, tie rods, NASCAR style sway bars, power rack & pinion, aluminum front wheel hubs with bearings, and teflon-lined heim joints for quiet & bind-free suspension

    Shipping:

    • We ship assembled chassis using enclosed car transporters. If you order the chassis un-assembled, we’ll ship it via truck-freight in a crate. There is a crating fee, which will be determined upon ordering.
    • Pricing is for reference only. For questions, call 815.206.2230

    Pricing:

    View the current chassis profile

  • 1947–1954 3100, Series-1 GMC, Chevy Pickup Truck Chassis

    1947–1954 3100, Series-1 GMC, Chevy Pickup Truck Chassis

    Details:

    From Schwartz Performance Inc.

    Bolt-in modern high performance full-length chassis for 1947, 1948, 1949, 1950, 1951, 1952, 1953 and 1954 GMC & Chevrolet pickups:

    • Chevrolet 1/2 ton
    • GMC 1/2 ton

    Our full frames for 1947-1953 Chevrolet & GMC Series 1 pickup trucks fasten to the cab & bed the same way your stock frame does. There is no floor cutting required, and the ride height is dropped from stock. The Ridetech coilovers used have adjustment for damping and ride height to give your truck an edge in autocross competitions as well as the ability to have a comfortable ride. All of our chassis utilize the same suspension geometry, which means your truck will now have all modern suspension and steering components and geometry.
    This Schwartz chassis allows up to a 335 wide tire to fit in your [mini-tubbed] wheel wells, & we recommend up to a 265 wide front tire.
    Our standard 13″ brake setup fits under 17″ wheels, and some 16″ wheels. For 15″ or 16″ rims we recommend our 12″ brake kit. Call for pricing.

    Which options do I choose?

    Brakes:

    -Step up to the 14-inch Baer 6P Pro-Plus and get a brake system that will suit whatever you want to do. We race our 1965 Tempest often with this brake setup.
    -The baddest kit is the Baer 6S, which is a one-piece forged caliper. This brake kit suits the hardcore roadracer, but does not sacrifice street driving.
    -The 14″ brakes require a 18″ diameter wheel, however. Additionally, the Baer calipers are available in many colors.

    Coilover shocks:

    -We use RideTech coilovers as standard on our chassis systems. The two options we offer are single-adjustable and triple-adjustable.
    -Single adjustable coilovers offer 24 “clicks” of adjustment for damping, as well as ride height adjustment. These will suit the weekend autocrosser/roadracer, as well as daily drivers.
    -Triple adjustable coilovers offer the same damping adjustment as the singles with the addition of high and low speed compression adjustments, and a remote reservoir. These allow you to fine-tune your suspension for a specific type of driving. These are recommended for those who are willing & able to spend time tuning the shocks, and/or for the roadracer where every thousandth of a second counts.
    -Air ride is also available, please call for pricing & info.

    coilover options1

    Rear end housing:

    -Our standard axle is a Moser full-floating 9″ style housing, with 31-spline axles. We have tested this rear end up to 1000hp street cars with no issues. Contact us for higher HP, or if you’ll be drag racing it often on slicks with over 800hp.
    -The Heidts IRS option is for those craving an IRS in their musclecar. This is recommended for up to 700hp.

    housing options2

    Third member/differential:

    -The Ford 9″ comes with a clutch-type posi. Our first option is just that, with a cast-iron center section. If you have less than 500hp and won’t be racing the car often, this is just fine for you.
    -The Detroit TrueTrac differential is a helical-gear type posi, which holds up to more power than the clutch posi, lasts longer (no wearable parts), and is quiet enough for street cars.
    -Moser offers a new nodular iron case which is recommended for 600+ hp and racing. Their aluminum case also holds up to higher horsepower, and is much lighter than iron cases.

    Pictures:

    (Click to enlarge)

    Base price includes:

    • A fully welded chassis, built on a precision jig
    • Adjustable transmission crossmember
    • All front and rear suspension components (minus coilovers): control arms, ball joints, tie rods, power rack & pinion, aluminum front wheel hubs with bearings, and teflon-lined heim joints for a quieter & bind-free suspension
    • BASE PRICE DOES NOT INCLUDE ANY BRAKES, SHOCKS, OR REAR END. CHOOSE THOSE ITEMS BELOW

    Payment terms: 75% down at time of order, remaining 25% due before shipment.

    Shipping: For an assembled frame, we use an enclosed car transporter. If you don’t want the frame assembled, we’ll ship it truck freight in a crate. There is a crating fee which will be determined upon ordering.
    Pricing below is only for reference. Please call to order.

    Pricing:

    View the current chassis profile

  • Schwartz Performance 2013 Contingency Program

    Schwartz Performance in pleased to announce our 2013 Contingency Program.

    To show our appreciation of customers using our Schwartz G Machine Chassis, we have over $15,000 up for grabs at various Pro-Touring type events. Eligible events are American Street Car Series, Goodguys Autocross, Heidts Performance Car Challenge, Lingenfelter Performance Nationals, Midwest Muscle Car Challenge, Day at the Strip, Motor State Challenge, Optima Faceoff, Optima Invitational, Car Craft Real Street Eliminator, Chevy High Performance Shootout, Popular Hot Rodding Street Machine of the Year, Holley’s LS Fest, Ohio Musclecar Challenge, So-Cal Challenge and other Autocross at large events such as: Hot Rod Power Tour, Mopars at the Strip, Mustang Club of America, etc.

    Simply run our decals on your Schwartz Chassis equipped car at the event, send us a photo of your car in action at the event and a photo of the event results.

    Email jeff@schwartzperformance.com for a detailed copy of the rules.
    Most events get $200 for an AX or Road Course win in any given class, plus bonuses for overall wins and a year end awards.

    Schwartz Performance Inc. manufactures “bolt in” high performance chassis for over 20 models of GM, Ford, Dodge, Plymouth, vehicles.
    Contact
    Jeff Schwartz
    815-206-2230
    jeff@schwartzperformance.com

  • Schwartz Performance G-Machine Chassis: The ultimate muscle car chassis!

    Schwartz Performance has been producing chassis/frames for muscle cars since 2005. Since the beginning, we’ve been striving to be the best and have more options than anyone in the industry.

      Click the “CHASSIS” button above!

      Schwartz Performance offers:

    • STANDARD 13″ brakes! (6 piston front calipers, 12″ 4 piston rear)

    • STANDARD RideTech single-adjustable coilover shocks!

    • STANDARD posi differential!

    • STANDARD full-floating 9″ rear end!

    • STANDARD power rack & pinion!

    • MORE bolt-in models available than any other company!

      • Each chassis is built to order. What does that mean? This means that they can be tailored to fit your project. Need extra bracing for your 1600hp twin turbo? Want a different rear end than what we offer? We’re willing to work with your needs!

      Why are our G-Machine muscle car chassis better than the competition?

        In addition to better standard options than our competition, Schwartz Performance also has:
    • The longest shock travel of any chassis manufacturer.

    • Bind-free suspension links & components for smoother ride & quicker suspension transitions with less jarring; i.e. potholes, apexes, etc. Polyurethane and rubber bushings bind way more than our system.

    • Infinite adjustability! Caster & camber can be adjusted without shims, using the lower links. Since we allow this much adjustment, the suspension can be fine tuned to whatever driving or racing style you prefer!

    • Our current chassis models include:

    • Ford Mustang – 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973 coupe, fastback, & convertible
    • Ford F1 Pickup – 1948, 1949, 1950, 1951, 1952
    • Mercury Cougar – 1967, 1968, 1969, 1970
    • Mopar A-Body 108″ wheelbase – 1967, 1968, 1969, 1970, 1971, 1972, 173, 1974, 1975, 1976, 1977 Barracuda, Duster, Valiant, Demon.
    • Mopar B-Body – 1968, 1969, 1970 Charger, Road Runner, Coronet, GTX, Super Bee.
    • Mopar E-Body – 1970, 1971, 1972, 1973, 1974 Plymouth Cuda & Challenger.
    • Chevy – 1955, 1956, 1957 Bel Air, 210, Tri-5
    • Chevrolet fullsize X-frame cars – 1959, 1960, 1961, 1962, 1963, 1964 Chevrolet Biscayne, Impala, Bel Air.
    • Chevrolet fullsize B-Body – 1965, 1966, 1967 Chevrolet Biscayne, Impala, Bel Air.
    • GM A-Body – 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 173, 1974, 1975, 1976, 1977 Chevelle, GTO, Lemans, Cutlass, Skylark, etc. (Wagons & El Camino 1964-1972 only).
    • Chevrolet Monte Carlo- 1970, 1971, 1972.
    • GM F-Body – 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981 Camaro, Firebird, Formula, & Trans Am.
    • GM Chevy II / Nova X-Body – 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974 Chevy II, Nova, Ventura, Omega, Apollo.
    • Chevy & GMC pickup truck – 1947, 1948, 1949, 1950, 1951, 1952, 1953 Series 1 Advanced Design / 3100 pickup trucks.
    • Chevy & GMC pickup truck – 1955, 1956, 1957, 1958, 1959 Task Force pickup trucks.
    • Chevy & GMC C10 pickup truck – 1967, 1968, 1969, 1970, 1971, 1972.
    • GM G-Body – 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988 Monte Carlo, Regal, Grand National, El Camino, Malibu, etc.
    • When you think of upgrading your muscle car to modern specifications, think of Schwartz Performance!

  • Schwartz Performance heads West; wins autocross

    Jeff hit the road & headed West to hit 2 Goodguys events to compete in their autocross competitions. Our 1949 Chevy Pickup and our 1965 Pontiac Tempest were
    The first stop was Scottsdale, AZ. Jeff & the ’49 Chevy pickup took home 1st place in the Truck class, edging out Craig Morrison’s 1950 Chevy pickup.
    Our 1965 Pontiac Tempest took 2nd place in the Street Machine class.

    autoxgoodguysScottsdale

    Both of these test vehicles are equipped with our infamous Schwartz G-Machine Chassis, big brakes, and BFG tires.

    goodguys nov2012

    The next stop was to Del Mar, CA. Since Jeff won the Truck class the previous week, Goodguys placed him [as a driver] in the Pro class. The ’65 Tempest ended up 4th overall in the Pro class, while the truck wasn’t too far behind.

    ggtruck1
    end of GG delmar.jpg
    ggtruck awards

    We also want to thank Baer Brakes for giving a tour of their manufacturing facility in Phoenix, AZ

    baer-rick-jeff
  • G-Machine Chassis at the SEMA Show 2012

    This year, three cars equipped with a Schwartz Performance G-Machine Chassis were on display at the SEMA show.

    The first was our friend Murray Pfaff of Pfaff Designs, who had his Schwartz G-Machine Chassis equipped 1959 Imperial Speedster in the Autotrader display. Murray has designed many paint schemes and interiors for our customers and projects of our own.
    This car is over-the-top and completely custom. For more information on Pfaff Designs, go to www.PfaffDesigns.com

    1959imperialspeedster5 Murray's Imperial Speedster2

    Another was Kevin Tetz, who had his newly-completed 1966 Ford Mustang called “Jaded” in the Heatshield Products booth. You may have heard Kevin’s name from the show “Trucks!” Kevin paid special attention to is personal Mustang, and he was very meticulous with the details.
    This beautiful ’66 features 14″ Baer 6P brakes, Ridetech coilovers, and a ton of custom accessories. Its interior is based off of a later-model Mustang Cobra, as well as the engine.
    Modified Mustangs & Fords has several tech stories featuring this Mustang, they can be found in this list:

    http://www.mustangandfords.com/projectcars/

    DSCN6907 DSCN6904

    DSCN6896 DSCN6897

    Lastly, our customer Dan Howe and his Schwartz G-Machine Chassis-equipped 1984 Monte Carlo was invited to Optima’s Ultimate Street Car Invitational (OUSCI) after participating in the Sandhills Open Road Challenge this Summer. OUSCI is held in Pahrump, NV after the SEMA show, or Saturday November 3rd this year. The event standings will be posted within a couple weeks.

    burnout ousci
    DSCN6828 DSCN6801